• Salesman
  • Gearmotor Chat Viber
  • Salesman
  • Electric motor Chat Viber
  • Salesman
  • AC Motor Chat Viber
  • Salesman
  • Worm gear motor Chat Viber
  • Salesman

What is a servo motor and when is it used?

Thursday - 30/07/2020 14:52
Selection of an electric motor is fundamental for any electromechanical project. When the project requires maximum precision, it is increasingly common to think about the star of this article: servo motor.
What is a servo motor and when is it used?
Get to know how they work and why they are one of the basic devices in robotics and industrial sectors that require highly precise motions.
What is a servo motor?
Also called servos, they are actuation devices for the precise control of speed, torque and position. They have a better performance and precision when compared to actuations based on frequency converters, since these do not offer position control and have low effectiveness at low speeds.
A servo motor is a device that contains an encoder which converts the mechanical motion (turns of the shaft) into digital pulses interpreted by a motion controller. It also contains a driver; and in conjunction, they make up a circuit that governs the position, torque and speed.
Their main specifications are torque and speed.
motor servo

Servomotors can be found in camera zooms, lift doors, or tools we may have at home.
Parts of a servo motor
A servo motor is composed of:
An electric motor: That is in charge of generating the motion through its shaft.
A control system: This system allows for control over the motor’s motion by sending electric pulses.
A drive system: It is formed by gears which may increase or decrease the speed and torque.
A potentiometer: It is connected to the central shaft, and informs at all times the angle in which the motor’s shaft is positioned.
Step motors or servo motors?
Using a servo motor implies an unnecessary extra cost for some, since there are also step motors (a more affordable option that offers a precision that is close to that of servo motors). So what is a step motor?
A step motor is an electrical motor, but it does not spin; instead, as its name implies, it moves step-by-step. In other words, they do not spin continuously; they do so by a specific number of degrees. You can check out our post dedicated to step motors and find out more in-depth when to use it, and why.
So, when do you use a servo motor?
Servo motors are considered to be fundamental in the design and manufacturing of robots. These are systems that require a precise and controlled mechanical positioning. We can see them on fields such as industrial automation or the growing robotic surgery field.
With the emergence of digital servo motors, great advances have been achieved in regards to control and efficiency. The increase in performance results from the control electronics using a microcontroller to do all the work. This fact allows more control pulses to be fed to the motor, increasing the motion precision and performance.
On the other hand, more readings of the potentiometer are made per second, and more efficient and smaller drivers are used, which allow for controlling more power with a much smaller circuit. If this wasn’t enough, the microcontroller offers the chance to program certain parameters such as travel, central position, the neutral zone, etc.
Servo motors allow us to create all kinds of controlled movements, and are undoubtedly an important breakthrough when developing new technologies.

Total notes of this article: 9895 in 2505 rating

Click on stars to rate this article

  Reader Comments

Security Code