• Salesman
           +(84)918.26.11.44
  • Chat Viber
  • Salesman
           +(84)987.246.757
  • Chat Viber
  • Salesman
           +(84)941.976.189
  • Chat Viber
  • Salesman
           +(84)949.380.913
  • Chat Viber
  • Salesman
           +(84)923.886.133
High Torque Gear Motors

High Torque Gear Motors

  •   09/09/2020 08:45:00 AM
  •   Viewed: 102
  •   Feedback: 0

A gear motor is a single component that integrates a gear reducer with an electric motor. Depending on their design and purpose, such geared-motor units can produce high torque even at low speeds or with low horsepower.

Choosing a Brushless Motor and Manufacturer

Choosing a Brushless Motor and Manufacturer

  •   04/09/2020 10:34:00 AM
  •   Viewed: 104
  •   Feedback: 0

The current market of motion solutions favors brushless motor manufacturers. The evidence is the statistics from recent research: the 2017 sales of the actuator type amounted to about 6 billion USD with expected growth at the rate of almost 11%.

What are gearmotors used for speed-control applications?

What are gearmotors used for speed-control applications?

  •   27/08/2020 01:39:00 PM
  •   Viewed: 263
  •   Feedback: 0

Aside from their use in position control applications, gearmotors are used in speed-control applications as well.

What are gearmotor performance curves?

What are gearmotor performance curves?

  •   21/08/2020 01:31:00 PM
  •   Viewed: 252
  •   Feedback: 0

Performance curves for gearmotors are central to selecting the correct gearmotor for a given application. They typically display three parameters; speed, torque, and efficiency. Essentially, they combine motor performance and gearbox performance into one graph.

3 Ways to Improve Electric Motor Maintenance

3 Ways to Improve Electric Motor Maintenance

  •   19/08/2020 09:48:00 AM
  •   Viewed: 278
  •   Feedback: 0

Maintaining electrical equipment requires much planning and inspecting. Only through planned, periodic inspections will you be able to discover potential breakdowns.

AC Motors vs DC Motors

AC Motors vs DC Motors

  •   18/08/2020 10:19:00 AM
  •   Viewed: 279
  •   Feedback: 0

There are many differences between AC and DC motors. The most obvious difference is the type of current each motor turns into energy, alternating current in the case of AC motors, and direct current in the case of DC motors.

Using Dynamic Electric-Motor Monitoring to Identify Mechanical Issues

Using Dynamic Electric-Motor Monitoring to Identify Mechanical Issues

  •   18/08/2020 10:02:00 AM
  •   Viewed: 240
  •   Feedback: 0

Dynamic electric-motor testing is often called on-line testing because it requires the motor to be running and generally assumes the motor is in its natural environment. Dynamic testing involves the connection of voltage probes and current transformers. Connecting dynamic test equipment is safe, quick and non-intrusive.

How to design quiet gearmotors

How to design quiet gearmotors

  •   17/08/2020 03:03:00 PM
  •   Viewed: 204
  •   Feedback: 0

What applications need quiet gearmotors? The answer might surprise you — because the human ear can detect noise at 10 dB lower than ambient levels, and many gearmotors operate in close proximity to people.

Why electric motor should use speed reducer (gearbox)?

Why electric motor should use speed reducer (gearbox)?

  •   15/08/2020 02:26:00 PM
  •   Viewed: 331
  •   Feedback: 0

Speed reducer (gearbox) is the special device which used for reducing rotation speed and improving output torque. Speed reducer (gearbox) is the important part of mechanical drive system, at present, many applications with speed reducer (gearbox), such as transportation industry, construction, mechanical processing, and other yields. So, what are the benefits of speed reducer (gearbox) in using?

What’s the difference between standard and inverter-duty gearmotors?

What’s the difference between standard and inverter-duty gearmotors?

  •   13/08/2020 01:33:00 PM
  •   Viewed: 186
  •   Feedback: 0

Standard gearmotors are designed to operate over a wide range of conditions producing a range of output speed and torque. However, there are special motor designs aimed at specific applications, such as washdown motors used in food and beverage processing or explosion-proof motors used in hazardous locations. Inverter-duty gearmotors are a bit like this.

What are gearmotors used for position-control applications?

What are gearmotors used for position-control applications?

  •   12/08/2020 01:36:00 PM
  •   Viewed: 186
  •   Feedback: 0

Gearmotors are often used in position control applications. A prime example would be in packaging or material handling where a load needs to be picked up or placed at a specified location, or applications with more precise requirements such as micro-positioning in high-precision manufacturing or dispensing.

Gearbox service factor and service class explained

Gearbox service factor and service class explained

  •   05/08/2020 03:11:00 PM
  •   Viewed: 183
  •   Feedback: 0

Sizing a gearbox (or gearmotor) for an industrial application typically begins with determining the appropriate service factor. In simple terms, the service factor is the ratio of the gearbox rated horsepower (or torque) to the application’s required horsepower (or torque).

Single Phase Gear Motors: Features And Benefits

Single Phase Gear Motors: Features And Benefits

  •   04/08/2020 02:15:00 PM
  •   Viewed: 215
  •   Feedback: 0

Electric motors provide the mechanical energy for the correct operation of tools and machinery. With this in mind, we invite you to find out how single-phase gear motors work and their main features.

Gearing servo motors for improved performance

Gearing servo motors for improved performance

  •   03/08/2020 03:18:00 PM
  •   Viewed: 197
  •   Feedback: 0

Selecting the right gear can help servos meet the demand for more complex moves at higher torques and speeds.

The Case for Drum Motors for Your Food Conveyor System

The Case for Drum Motors for Your Food Conveyor System

  •   03/08/2020 02:04:00 PM
  •   Viewed: 227
  •   Feedback: 0

The hygienic benefits of internal drum motors make them the drive technology of choice in the processing zones and food handling areas of food plants.

Vibration Analysis of Electric Induction Motors

Vibration Analysis of Electric Induction Motors

  •   03/08/2020 08:52:00 AM
  •   Viewed: 237
  •   Feedback: 0

An electric motor is an electromechanical machine that converts electrical energy into mechanical energy. Electric motors fall into two broad groups: direct current (DC) motors and alternating current (AC) motors; alternating current motors are divided into single-phase and polyphase motors.

Methods to optimize electric motor efficiency

Methods to optimize electric motor efficiency

  •   01/08/2020 03:42:00 PM
  •   Viewed: 243
  •   Feedback: 0

Widely publicized estimates show that systems driven by electric motors consume more than half of the electricity produced and more than 70 percent of the electricity used in many industrial plants.1 Now that energy and operating costs are at a premium, it makes more sense than ever to increase motor efficiency.

Why electric motor should use speed reducer (gearbox)?

Why electric motor should use speed reducer (gearbox)?

  •   31/07/2020 02:20:00 PM
  •   Viewed: 215
  •   Feedback: 0

Speed reducer (gearbox) is the special device which used for reducing rotation speed and improving output torque.

Top 10 tips for industrial gearbox inspection and maintenance

Top 10 tips for industrial gearbox inspection and maintenance

  •   30/07/2020 03:22:00 PM
  •   Viewed: 206
  •   Feedback: 0

To prolong the operational life of your industrial gearboxes, regular inspections and maintenance is essential. On the other hand, removal of the gearbox for a full inspection and a possible overhaul can cause undesirable lengthy downtime and breaks in shift work or production lines.