• Salesman
           +(84)918.26.11.44
  • Chat Viber
  • Salesman
           +(84)987.246.757
  • Chat Viber
  • Salesman
           +(84)941.976.189
  • Chat Viber
  • Salesman
           +(84)949.380.913
  • Chat Viber
  • Salesman
           +(84)923.886.133

What is a Gear motor?

Wednesday - 03/01/2018 08:48
In our company history, we mention that Dolin Machines is one of the pioneers in the design and development of small (fractional HP = FHP) gearmotors in Vietnam.
What is a Gear motor?

Dolin Machines introduced the first integral gearmotors. Here is a brief discussion on how we define a gearmotor or geared motor…

What is a Gearmotor?

A small motor (ac induction, permanent magnet dc, or brushless dc) designed specifically with an integral (not separable) gear reducer (gearhead). The end shield on the drive end of the motor is designed to provide a dual function.

 

động cơ giảm tốc

The side facing the motor provides the armature/rotor bearing support and a sealing provision through which the integral rotor or armature shaft pinion passes.

The other side of the end shield provides multiple bearing supports for the gearing itself, and a sealing and fastening provision for the gearhousing. This construction provides many benefits for a user and eliminates the guesswork of sizing a motor and gear reducer on your own.

Gearmotor Benefits:

Using the right sized motor and gearhead combination for an application helps to prolong gearmotor life and allows for optimum power management and power utilization. Traditionally, design engineers oversized motors and gearheads to add “safety factors” — Dolin “factory matched” gearmotors consistently deliver rated performance.

 

TẢI NẶNG

Quieter operation due to integral castings and integral pinion, ground or hobbed on the armature or rotor shaft. Fewer parts requiring assembly resulting in “near perfect” alignment of the rotor, pinion and geartrain.

Minimum risk of lubricant leakage, because of “O-ring” and lip seal construction. The design can be more compact and the lubrication can be controlled better (for various mounting configurations).

 

NMRV gear box

Gearmotors eliminate the need for motor/gearhead couplings and eliminate any potential bearing alignment problems, common when a motor and gearhead are bolted together by an end-user (separable gearheads). Misalignment can result in bearing failure due to fretting corrosion.

 

cyclo

Separable motor and gearhead solutions make more sense in larger integral horsepower (>1 HP) applications. For example, when a 100-pound motor is mounted to a 500-pound gearhead …

Total notes of this article: 0 in 0 rating

Click on stars to rate this article

  Reader Comments

Security Code